Skip to content

Safety instructions

Structure of safety instructions

The signal word classifies the hazard. Reference to the type/consequences and source of the hazard is made underneath the signal word. Information on how to avoid the hazard is indicated by an arrow (➢).

SIGNAL WORD

Type/consequences of hazard!

  • Source of hazard

➢ Measures to prevent hazard

Graduation of risk level

The signal word classifies the hazard. Instructions for preventing the hazard are identified by an arrow (➢).

Explanation of used symbols

DANGER

Indicates an imminent danger. If not avoided, death or severe injury will result.

WARNING

Indicates a possible danger. If not avoided, death or severe injury could result.

CAUTION

Indicates a possible danger. If not avoided, light or minor injuries could result.

ATTENTION

Indicates a possibly damaging situation. If not avoided, the system or something in its surroundings could be damaged.

Recommendation for use

Recommendation for use: The symbol "Recommendation for use" indicates terms and/or conditions that strictly need to be observed to ensure optimised and/or zero-defect operation. Tips and suggestions for the efficient use of the device and software optimisation are also provided.

Symbols

Symbol Meaning
Label on batteries and on electrical and electronic devices. These may not be disposed of with household waste, but must rather be disposed of separately. They must be returned to the point of sale or a disposal system.
Symbol for the protective earth connection (PE)
\\le1\ads-daten\DT\ED\Daten\DocuGlobe\Handbuch_Anleitung\1 Betriebsanleitungen\MMD_MMT8017_8024\1 Betriebsanleitung\V2.0\Neue_Erdung\Symbol_FE.gif Symbol for the functional earth connection (FE)

Data, figures and modifications

All data, text and figures were prepared to the best of our knowledge. They do not represent any assurance for the properties themselves. Despite taking utmost care, no liability can be assumed for accuracy, completeness and actuality of the information. Subject to changes.

Trademarks

It is noted that any software and/or hardware trademarks and any company brand names mentioned in this documentation are all subject to the general trademark protection rights. Big-LinX® and X-Remote® are registered trademarks of ADS-TEC. All other third-party trademarks used are hereby acknowledged. In the case of infringement of trademark rights, ADS-TEC reserves the right to exercise all rights.

This instruction manual is protected by copyright. For the authorised user, simple usage rights are granted within the scope of the intent of the contract. Any modified use or exploitation of the provided content, particularly duplication, modification or publishing in whatever form is permitted only with the prior consent of ADS-TEC. In the case of copyright infringement, ADS-TEC reserves the right to exercise all rights.

Conformity

The manufacturer hereby declares that this device has been marked with the CE mark in accordance with the basic requirements and other relevant conditions of the following European Directives:

  • 2011/65/EU RoHs Directive

  • 2014/30/EU EMC Directive (only devices without WWAN)

  • 2014/53/EU RED Directive (only devices with WWAN)

  • 2014/35/EU Low Voltage Directive

  • EG 1907/2006 REACH Regulation

The following applies with respect to electromagnetic compatibility: The device is a Class A device (industrial sector).

The EU conformity declaration is available for download at https://www.ads-tec-iit.com/en/support/eu-conformity

Recommendation for use

Recommendation for use: For full compliance with the EMC legislation, all components and cables used for device connection must also be compliant with these requirements. It is therefore necessary to employ BUS and LAN cables with shielded connectors and these must be installed as per the instructions contained in the instruction manual.

Devices with FCC marking on the type plate:

Compliance with the requirements of the FCC (USA)

Class A digital device

This device has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when used in a commercial environment. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this device in a residential area is likely to cause harmful interference. In such a case, the user must correct the interference at his own expense.

Compliance applies for models with a corresponding FCC marking on the type plate.